 |
The types of ÖHF controllers
There is a choice of six different basic types, all of which can be fully customised to meet your requirements. We can, of course, also build special-purpose controllers to your exact specifications.
All controllers can be installed in a control cabinet, or they can be mounted on special panels in accordance with dimensions you supply, e.g. for MRL lifts.
Lead times range from two to three weeks. Lead times of less than one week are possible by arrangement and with an additional charge.
Remote support for lift systems is, of course, available via the Internet or by direct modem link. The necessary setup and remote-support software is supplied free of charge.
You will be impressed by the details such as the touchscreen and the colour displays, and you will appreciate the plain-text (error) displays (words instead of numeric codes).
The following information gives you a brief overview of the individual types.
|
 |
|
 |
F2002Con - F2002Bus - F2002Bus+ - F2002MaxBus
These basic models with two-button collective control are suitable for new installations of all types. They have a touchscreen configuration display with plain-text output and can be parameterised with laptop software. Remote support is available via an optional modem.
All versions can be equipped with magnetic switches for shaft-position information, or with absolute encoders. Multi-colour TFT displays for floor indicators are standard. Ask us about the extensive setting options. |
|
|
 |
F2002Con
Conventional wiring, up to 16 landings, maximum of 8 selective floors
F2002Bus
Bus system, up to 16 landings, maximum of 8 selective floors
F2002Bus+
As F2002Bus, but 4 door sides (separate adjustments), up to 4 selective doors per stop
F2002MaxBus
Bus system, up to 32 landings, maximum of 16 selective floors
|
|
|
 |
F2002Lite - F2002Eco
These basic versions have magnetic switch shaft-position information systems and one-button collective control and are intended mainly for modernisations. They do not differentiate between internal (car) and external (landing) call confirmations.
F2002Lite
-
up to 4 landings
-
floor-indicator outputs 1 out of N
-
one door-control output, which can be redirected to the
particular door side via floor-indicator outputs
- door times can be adjusted with laptop software
-
no fault memory, no statistics memory, etc.
-
no remote-support capability
|
|
|
 |
F2002Eco
-
up to 8 landings
-
binary floor-indicator output
- two door controls
- optional touchscreen console (suitable for every
F2002Eco), or can be set with a laptop
-
fault memory (last 100 faults) is power-failure proof
- statistics memory, and much more
-
with remote-support capability via optional modem |
|
|
 |
Multi-colour TFT indicator displays
The F2002Eco, F2002Bus(+), F2002Con und F2002MaxBus lift controllers all have the capability of controlling our multi-colour TFT indicator displays.
TFT floor-indicator display, 16 colours, programming as required
|
|
|
 |
TFT floor-indicator display, 3 colours, with 200 various preprogrammed texts
|
|
|
 |
Touchscreen configuration display for the Bus, Con and Eco controllers
|
|
|
 |
Software
The software for setting up, servicing, and maintaining your lift installations is supplied with each controller. Here, too, it's a case of "the exceptional is the norm" when you work with us.
Every item in the configuration can be set and altered through individual menus. The memories for faults, program-sequences, and statistics can also be read out, saved and printed.
|
|
